PE Adhesive Lined Dual Wall Heat Shrink Tubing φ3 - 125MM DWDRS Series

Color Heat Shrink Tubing With Glue DWDRS , Dual Wall Heat Shrink Tube , φ3-φ125mm

 

1. Product Introduction

DWDRS series adhesive-line dual wall tube are adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.It Tensile Strength is 10.3Mpa and Dielectric Strength is more than 15kV/mm.

 

 

2. Technical Parameter

PE Base Property

Property Test Method Result
Tensile Strength ASTM D638 10.3Mpa
Elongation ASTM D638 ≥300%
Dielectric Strength ASTM D149 ≥ 15kV/mm
Volume Resistivity ASTM D257 ≥ 1014Ω.cm
Longitudinal Change ASTM D2671 -10%~+10%
Flame Retardant UL224,VW-1 Pass
Heat Shock ASTM D2671 Pass
Cold Blend ASTM D2671 Pass
Water Absorption Ratio ASTM D570 <0.5%

 

Hot Melting Adhesive Property

Property Test Method Result
Water Absorption Ratio ASTM D570 <0.2%
Softening Point ASTM E8 95℃
Peeling Strength (PE) ASTM D1000 120N/25m
Peeling Strength (AL) ASTM D1000 80N/25m

 

 

3. Specification Packaging

3:1 Ratio

Size Before Applied After Applied(mm) Package
Inch mm
 
Inner Diameter
(mm)
Inner Diameter
(mm)
Wall
Thickness
Adhesive
Thickness
M/Spool
Ø1/8 Ø3.2 3.2 1.0 0.90±0.15 0.35±0.10 200
Ø3/16 Ø4.8 4.8 1.6 1.00±0.15 0.40±0.10 100
Ø1/4 Ø6.4 6.4 2.20 1.25±0.15 0.45±0.12 100
Ø5/16 Ø7.9 7.9 2.70 1.30±0.15 0.50±0.12 100
Ø3/8 Ø9.5 9.5 3.20 1.40±0.15 0.50±0.12 50
Ø1/2 Ø12.7 12.7 4.20 1.70±0.15 0.50±0.12 36.6
Ø5/8 Ø15.0 15 5.20 1.80±0.15 0.55±0.15 30.5
Ø3/4 Ø19.1 19.1 6.30 1.95±0.15 0.55±0.15 30.5
Ø1 Ø25.4 25.4 8.50 2.05±0.20 0.55±0.15 30.5
Ø1-1/4 Ø30.0 30 10.20 2.20±0.20 0.60±0.15 24.4
Ø1-1/2 Ø39.0 39 13.50 2.50±0.20 0.60±0.15 18.3
Ø2 Ø50.0 50 17.00 2.80±0.25 0.70±0.15 12.2
Ø5/2 Ø64 64 21.00 3.00±0.25 0.70±0.15 6.1
Ø3 Ø75 75 25.00 3.00±0.30 1.00±0.20 1.22
Ø7/2 Ø90 90 30.00 3.00±0.30 1.00±0.20 1.22
Ø4 Ø100 100 34.00 3.00±0.30 1.00±0.20 1.22
Ø5 Ø125 125 42.00 3.00±0.30 1.00±0.20 1.22

 

4:1 Ratio

Size Before Applied After Applied(mm) Package
Inch mm Inner Diameter
(mm)
Inner Diameter
(mm)
Wall
Thickness
Adhesive
Thickness
M/Spool
Ø5/32 Ø4.0 4 1 1.1±0.15 0.4±0.15 200
Ø1/4 Ø6.0 6 1.5 1.5±0.15 0.5±0.15 100
Ø5/16 Ø8.0 8 2 1.7±0.15 0.5±0.15 50
Ø1/2 Ø12.0 12 3 2.0±0.15 0.6±0.15 1.22m/pc
Ø5/8 Ø16.0 16 4 2.3±0.25 0.6±0.15 1.22m/pc
Ø25/32 Ø20.0 20 5 2.6±0.25 0.6±0.15 1.22m/pc
Ø1 Ø24.0 24 6 3.0±0.30 0.7±0.15 1.22m/pc
Ø3/2 Ø32.0 32 8 3.0±0.30 0.7±0.15 1.22m/pc
Ø2 Ø52.0 52 13 3.3±0.30 0.7±0.15 1.22m/pc

 

4. Ordering Information

Packing
1. By diffrent cartons and plastic pallents.

2. Anonymous packing is available.

3. OEM packing is available.

4. Do as customer's requirements.

Delivery
1. Our factory is nearby Shanghai.

2. Other seaport is acceptable.

3. Do as customer's requirements.

 

5. Application Case

Products

Dual Wall Heat Shrink Tubing

Contact Supplier
Change Language

Select Language